Technical Specs
RhinoFLOR® Bare

RhinoFLOR® bare finish raised floor panels are manufactured from chipboard core (approx. 680 kg/m³) non-toxic and light weight material. The top and bottom surface of the core are laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the chipboard core.


F30F38
Panel Size (mm)
600 x 600600 x 600
Panel Thickness31.00 mm39.00 mm
Panel Weight8.00 kg10.00 kg
System Weight28.00 kg34.00 kg
Concentrated Load3.00 kN4.50 kN
Uniform Load8.00 kN12.00 kN
Ultimate load9.00 kN13.50 kN
  • This rigid grid system is tested in accordance with PSA MOB PS/SPU specification

  • Panel deflection at centre edge must not exceed 2.5 mm

  • Performance to a safety factor of 3 x static load

  • Structural performance based upon a full Rhino access floors system i.e. panels & pedestals

Features
RhinoFLOR® Bare
  • Light weight raised floors

  • Good acoustic performance

  • Solid underfoot

  • Low air leakage rate

  • Safe and easy access

Download Brochures
RhinoFLOR® Bare
More About